Skud Technical Case Study Cleanroom Performance Testing Brunei
Case study · Cleanroom Performance Testing

A healthcare cleanroom in Brunei, certified to ISO 14644.

Independent Cleanroom Performance Testing and ISO 14644 certification for a healthcare facility in Brunei, with the controlled-environment suite proven against its design class in a single mobilisation.

Cleanroom Performance Testing Brunei ISO 14644 NEBB methodology
Project snapshotSKUD
ServiceCleanroom Performance Testing
SectorHealthcare
LocationBrunei
ClassesISO 14644, to design class
MethodNEBB cleanroom procedural standard
OutcomeCertified to class
Scope at a glance

One test discipline, the full parameter set.

ISO 14644
Certified to the class the environment was designed to hold
Full suite
Every governing parameter measured, not particle count alone
One visit
Certified in a single mobilisation to Brunei
Independent
Skud did not design, install, or commission any of it
The brief

A controlled environment, proven independently.

A healthcare facility in Brunei needed its controlled-environment suite tested and certified to ISO 14644 before it could support clinical use. Skud was engaged to verify performance independently, so the certificate would answer to the standard rather than to whoever built the room.

Skud mobilised to Brunei for the work. A cleanroom is proven on site, under its own conditions, and an independent certifier that will travel to the facility is what makes the certificate possible at all.

The challenge

A cleanroom is only as certified as its weakest reading.

  • Classification is the headline, but not the whole test. The suite had to pass particle count and recovery and pressure and filter integrity together, because a fail on any one is a fail.
  • A healthcare environment holds tight tolerances, so every parameter was measured against the design class rather than assumed from a walk-through.
  • Working around a live and sensitive facility, without disturbing what it was built to protect.
Full test scope

Every certification regime, not a particle count alone.

Cleanroom certification is the sum of its parameters. Across the facilities tested, the scope covered:

  • Airflow velocity and air change rate
  • Airborne particle count and ISO 14644 classification
  • HEPA filter leak testing, by PAO challenge
  • Room differential pressure
  • Room recovery testing
  • Temperature and relative humidity
The outcome

Certified to class, in a single visit.

The cleanroom was certified to its ISO 14644 class against the full governing parameter set, with documentation delivered to meet the facility's regulatory and operational requirements, in one mobilisation to Brunei and backed by an independent third-party record.

Worked to ▸ ISO 14644-1, -2 and -3 ▸ NEBB Procedural Standard for Certified Testing of Cleanrooms ▸ IEST Recommended Practices
Cleanroom to certify?

Independent, NEBB-certified cleanroom performance testing to ISO 14644.